Disconnect the video cable connector from the motherboard. There are two more cables connected to the motherboard and we’ll remove them in the next step. Turn the motherboard upside down and disconnect two more cables.
How are organizations striking the balance between new initiatives and cost control?
Download our report to learn about the biggest challenges and how savvy IT executives are overcoming them.
Bluetooth Radio Management shall only be enabled for internal Bluetooth 4.0 enabled controllers. This will ensure that user will see a minimal disruption in service by ensuring that the Wi-FI device stack recovers and resumes connectivity to the network without the system needing a reboot.
The on/off state of Bluetooth-enabled controllers shall be controllable via software as described in Bluetooth Software Radio Switch. Description The following Pen device level requirement must be met and verified upon integration into a system. Devices must report support for Hang Detection and Recovery in WDI_GET_ADAPTER_CAPABILITIES.
The radio must maintain on/off state across sleep and reboot. System hardware: The system will allow for a PDLR (full device level reset). System: The System will indicate support for PDLR support.
Description Wideband speech enables high definition voice quality (audio is sampled at 16 KHz as opposed to only 8 KHz) for telephony audio on Windows devices when the user is communicating via a Bluetooth peripheral that also supports wideband speech. Description The following Pen device level requirement must be met and verified upon integration into a system. Device: The Lower Edge driver will be able to gather dumps with 25 ms and 250 Kb size System: The system must complete the reset within 10 seconds.
In today's technology-driven world, "innovation" has become a basic expectation.
IT leaders are tasked with making technical magic, improving customer experience, and boosting the bottom line -- yet often without any increase to the IT budget.
*Systems that support Connected Standby with Bluetooth enabled controllers must ship with Microsoft's inbox Bluetooth stack and support the MSFT Defined HCI extensions support for hardware offload of advertisement and RSSI monitoring (see System. The radio can be completely powered off if a bus-supported method is available to turn the radio back on. Resolution requirement for full requirement details. Description The following Pen device level requirement must be met and verified upon integration into a system. Terms: If-Implemented Description Wi-Fi device firmware has been known to hang and / or get in a stuck state.
The details of the specifications will be shared at a later date. Description When turning the radio off, Bluetooth enabled controllers shall be powered down to its lowest supported power state and no transmission/reception shall take place. Description The following Precision Touchpad device level requirement must be met and verified upon integration into a system. Microsoft highly recommend WLAN hardware module to support at least 802.11ac 2x2 configuration/design.
Business Justification: We want users to experience the best possible quality audio when using Bluetooth peripherals on Windows. This includes support for concurrent operation over Wi-Fi Direct & Station.